802.11ac Wave 2; 4×4:4SS; Int Ant; E Reg Dom

AIR-AP1852I-E-K9

£812.00

Conditions: New Factory Sealed
Delivery: Delivery within 48 hours
Warranty: 3 Years
Uplink: 0
Downlinks: 0
Category:

Description

The Access Point AIR-AP1852I-E-K9 of the Cisco 1852i series is a good choice for small to medium size networks. AIR-AP1852I-E-K9 supports 4 x 4 MIMO with three spatial streams for single users and three spatial streams for multi-users. It delivers 802.11 ac beam forcing transmission. It also provides an internal Antenna with 1 x 10/100/1000 BASE-T auto-sensing with RJ-45 and Power of Ethernet (PoE). Also, AUX for link Aggression, Management console port via RJ-45, and USB port for future software. Quick SpecsProduct CodeAIR-AP1852I-E-K9Description802.11ac Wave 2 Access Point, 4×4:4, Internal-Ant, E Regulatory DomainFeatures- 4×4 MIMO with four spatial streams, single-user MIMO- 4×4 MIMO with three spatial streams, multiuser MIMO- MRC- 802.11ac beamforming (transmit beamforming)- 20-, 40-, and 80-MHz channels- PHY data rates up to 1.7 Gbps (80 MHz in 5 GHz)- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)- 802.11 DFS- CSD supportRegulatory DomainE (E regulatory domain):- 2.412 to 2.472 GHz; 3 channels- 5.180 to 5.320 GHz; 8 channels- 5.500 to 5.700 GHz; 8 channels(Excludes 5.600 to 5.640 GHz)AntennaInternal AntennaInterfaces- 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)- 1 x 10/100/1000BASE-T autosensing (RJ-45), AUX (used for Link Aggregation)- Management console port (RJ-45)- USB 2.0 (enabled via future software)Dimensions (W x L x H)8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm)Weight3.12 lb (1.41 kg)

Reviews

There are no reviews yet.

Be the first to review “802.11ac Wave 2; 4×4:4SS; Int Ant; E Reg Dom”

Your email address will not be published. Required fields are marked *

Product Specifications

information
802.11ac Wave 2 Access Point, 4x4:4, Internal-Ant, E Regulatory Domain
SoftwareCisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for the Cisco Aironet 1850 Series Access Points
Regulatory DomainE (E regulatory domain): - 2.412 to 2.472 GHz; 3 channels - 5.180 to 5.320 GHz; 8 channels - 5.500 to 5.700 GHz; 8 channels (excludes 5.600 to 5.640 GHz)
Deployment modesCentralized local, Standalone, Sniffer, Cisco FlexConnect, Monitor, OfficeExtend, Mesh
Supported wireless LAN controllersCisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 5760 Series Wireless Controllers, Cisco Catalyst 3650/3850 Series switch with integrated controller Cisco Mobility Express
802.11n version 2.0 (and related) capabilities4x4 MIMO with four spatial streams Maximal ratio combining (MRC) 20- and 40-MHz channels PHY data rates up to 600 Mbps (40 MHz with 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 dynamic frequency selection (DFS) Cyclic shift diversity (CSD) support
802.11ac Wave 1 and 2 capabilities4x4 MIMO with four spatial streams, single-user MIMO 4x4 MIMO with three spatial streams, multiuser MIMO MRC 802.11ac beamforming (transmit beamforming) 20-, 40-, and 80-MHz channels PHY data rates up to 1.7 Gbps (80 MHz in 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 DFS CSD support Rogue device detection
Integrated antenna2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360° 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360°
Interfaces1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) 1 x 10/100/1000BASE-T autosensing (RJ-45), AUX (used for Link Aggregation) Management console port (RJ-45) USB 2.0 (enabled via future software)
IndicatorsStatus LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H)Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm)
Weight3.12 lb (1.41 kg)
EnvironmentalCisco Aironet 1850i Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25˚C, 15,000 ft. Operating temperature: 32° to 104°F (0° to 40°C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40˚C, 9843 ft.
System memory1 GB DRAM 256 MB flash
Input power requirementsAP1850: 44 to 57 VDC Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz
Power draw20.9W Note: When deployed using a Power over Ethernet (PoE) specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable.
Powering options802.3at Enhanced PoE Cisco power injector, AIR-PWRINJ4= Cisco local power supply, AIR-PWR-C= Cisco power injector, AIR-PWRINJ5= (Note:this injector supports 802.3af only) 802.3af Note: If 802.3af PoE is the source of power, (1) the 1852e 2.4-GHz radio will shift to 2x3 from 3x4, (2) The USB port and AUX Ethernet port are disabled on both the 1852i and 1852e.

Related products